An Induction furnace ramming material made from Dead Burnt Magnesite clinker in association with Chrome. Specially bonded with clays and other chemical binders to achieve the desired sintering characteristics. These are used in induction furnace for Basic Lining
This material is also designed for repairing the cracks and other erosion that occurs in the lining during usage. It possesses good workability and has no shrinkage upto 1650°C and has good erosion resisting properties. The chemical composition is similar to the ramming mass but the grading/ binder is different for good workability.
MgO - 70% min, Cr2O3 - 8min, SiO2 - 8%max, CaO - 2% max
Sieve Distribution 0-1 and 0-2 mm